PALLET PARKING
SINGLE POLE STACK PARKING (VL2C1)
This is simple dependent parking system and can be used to park Two sedan cars one above the other. When the car on the top is to be removed, the car at the bottom has to be first removed and then the top car has to be removed. This can mainly be used where the parking has to be done in the Aisle or Driving space or where the Width of the Parking slots are very less etc. This is more ideally suited for Apartments, which have a very long Aisle way and where currently cars are parked one behind the other.
- Only Sedan cars upto Max 2000 Kgs can be parked.
- Platform width of 1900 mm/ 2000 mm/ 2100 mm can be offered.
- Cars can enter the Parking system from both the directions.
- Easy Installation (within couple of hours it can be done)
Key Features
- Can be operated with 24 V DC controls.
- Key pendant is provided for safety, so that nobody can misuse.
- All safety features included.
- Minimal running cost per cycle.
- As it is Hydraulically operated, very minimal maintenance on the system is required.
TWO POLE STACK PARKING(VL2C1-2P)
This is simple dependent parking system and can be used to park Sedan/ SUV cars one above the other. When the car on the top is to be removed, the car at the bottom has to be first removed and then the top car has to be removed. This can mainly be used where the parking has to be done in the basement or on the Surface or Aisle etc. This is more ideally suited for Apartments/ Commercial establishment/ Office space, where in more of number of cars are to be parked, but space is restricted. It is also more suitable for existing basement provided enough clearance on the height is available.
- Sedan or SUV or a Combination of both can be Parked.
- Where space is a constraint, we can go with Sharing Pole, so that more cars can be accommodated.
- Individual Power pack for every system , so that in the event of any defect only one system will be out of order and rest can perform.
- Lifting is by Chain and not by Rope.
- Hydraulically operated and not Mechanical, hence less wear & Tear and Maintenance.
- Easy Installation (within couple of hours it can be done).
- Can be operated with either 240 V Single Phase or 415 V Three phase power supply.
- Key pendant is provided for safety, so that system is not misused.
- All safety features like Mechanical, Electrical Limit Switch, Sensor are inbuilt in the System.
- Multiple locking positions so that different Car heights can be accommodated without hitting the Roof while lifting.
- Parking platform is flexible so that while fixing or removing it is very easy and not Welded.
- Parking platform is fully Galvanised so that system can be installed in Open Area also.
- If client requires entire system can be Galvanised if the Parking lot is to be near to the Coastal area.
- Minimal running cost per cycle.
THREE LEVEL STACK PARKING (VL3C1)
This is simple dependent parking system and can be used to park Sedan/ SUV cars one above the other. When the car on the top is to be removed, the cars at the bottom has to be first removed and then the top cars are to be removed. This can mainly be used where lot of cars are to be parked and space is a major constraint. In this case the retrieval of the Car on the top can take upto 90 sec.
This is more suitable for Car Show Room, Car Service centre, Work place (where cars are parked in the morning and taken out only in the even), and any such areas where parking is done for long hours.
- Sedan or SUV or a Combination of both can be Parked.
- Where space is a constraint, we can go with Sharing Pole, so that more cars can be accommodated.
- Centralized Power Pack per system is provided.
- Lifting is by Chain and not by Rope.
Key Features :
- Hydraulically operated and not Mechanical, hence less wear & Tear and Maintenance.
- Key pendant is provided for safety, so that system is not misused.
- All safety features like Mechanical, Electrical Limit Switch, Sensor are inbuilt in the System
- Minimal running cost per cycle.
FOUR POLE STACK PARKING (VL4C1)
This is simple dependent parking system and can be used to park Sedan/ SUV cars one above the other. When the car on the top is to be removed, the cars at the bottom has to be first removed and then the top cars are to be removed. This can mainly be used where lot of cars are to be parked and space is a major constraint. In this case the retrieval of the Car on the top can take upto 90 sec.
This is more suitable for Car Show Room, Car Service centre, Work place (where cars are parked in the morning and taken out only in the even), and any such areas where parking is done for long hours.
- Sedan or SUV or a Combination of both can be Parked
- Where space is a constraint, we can go with Sharing Pole, so that more cars can be accommodated.
- Centralized Power Pack per system is provided.
- Lifting is by Chain and not by Rope.
Key Features
- Hydraulically operated and not Mechanical, hence less wear & Tear and Maintenance.
- Key pendant is provided for safety, so that system is not misused.
- All safety features like Mechanical, Electrical Limit Switch, Sensor are inbuilt in the System
- Lock release is Manual..
- Minimal running cost per cycle.
PIT TYPE STACK PARKING (VL2C1-P)
This is simple stack parking system and can be used to park Sedan/ SUV cars one above the other. In this Model any car can be removed and there is no need of removing other cars. This Model is more suitable where Parking can be below ground and in the Open area.
This is more suitable for Car Show Room, Car Service centre, Work place (where cars are parked in the morning and taken out only in the evening), and any such areas where parking is done for long hours.
- Sedan or SUV or a Combination of both can be Parked
- If the Soil is good and if we can dig deep this model is most suitable.
- Centralized Power Pack per system is provided.
Key Features
- Hydraulically operated and not Mechanical, hence less wear & Tear and Maintenance.
- Key pendant is provided for safety, so that system is not misused.
- All safety features like Mechanical Locking, Electrical Limit Switch, Sensor are inbuilt in the System.
- Minimal running cost per cycle.
